Rebel R/C Electric Vehicle Start up Pack & Charging Case

Write a Review
Add to Cart

Options

$175.99

Info

,UPC:

Info

UPC:
702735685940
MPN:
RRC00061

Description

Rebel R/C Electric Vehicle Start Up Pack & Charging Case

Kit Includes:

  • Hitec RDX1 AC/DC Battery Charger/Discharger
  • Gens Ace 2S Stick 50C LiPo Battery w/T-Style Connector (7.4V/5000mAh) (Type 2)
  • ProTek RC Flame Resistant LiPo Charging Bag (Large, 23x30cm)
  • Bat-Safe Mini LiPo Charging Case
  • 4 qty. - AA Batteries (Brand may vary)

RDX1 is an AC/DC ultra-performance microprocessor-controlled battery charger/discharger with management features suitable for all popular chemistries. Its sleek tower design allows easy front-loading plug-in convenience of balancing and temperature sensor ports, a USB link and USB 5VDC 2.1 amps and 4mm battery sockets. Deluxe features include a 3.2-inch easy-to-read LCD screen and our Charge Master software which allows the unparalleled ability to operate the RDX1 through the computer. This compact, 60-watt wonder brings integrated balancing, convenience and ease to all your charging operations.

Features:

  • Optimized Operating Software
  • 10 Battery Memory
  • Internal Lithium Battery Balancer
  • Multiple Lithium Battery Charge Modes
  • Works with Hitec's Charge Master Software
  • LiPo Battery Meter
  • Slim In-line Design Saves Valuable Space

Specifications:

  • Input: AC Input Voltage: 100-240V/DC Input: 11-18V
  • # Cells: 1-6S LiFe, LiIon, LiPo; 1-15C NiCd, NiMH; 2-20V Pb
  • Current Discharge: 0.1 - 2.0A
  • Charge Rate: 0.1 - 6.0A
  • LCD: YES
  • Length: 6.26 in (159mm)
  • Width: 2.85 in (72.5mm)
  • Height: 4.84 in (123mm)

WARNING NOTE: This charger is not compatible with Traxxas iD equipped LiPo Batteries; only Traxxas iD chargers properly charge Traxxas iD LiPo Batteries. NEVER, UNDER ANY CIRCUMSTANCES, use this charger to charge a Traxxas iD equipped LiPo Battery.

Gens ace 2S 7.4v lipo battery 5000mah with 50C discharge rate hardcase offers you very high power and very long run time for your RC cars. The 100C max burst rate gives you enough power for acceleration. It enhances your driving experience no matter what type of driving you are into. These 7.4V 2S 5000mah lipo batteries packs are made with superior Lithium Polymer raw materials from Japan and Korea. The advanced stacking technology enables a single cell of capacity to reach 5000mah. They are widely fit the 1/8 and 1/10 RC car Model.

The hardcase of this 7.4V 2s lipo battery 5000mah provides your batteries very solid protection, it comes with an equipped Deans plug. They are your ideal chooses for the RC car hobby

Features:

  • Quickly Recharged, 5C fast charge capable.
  • Long cycle life with 150 times minimum, up to 200Wh/kg energy density
  • Production in the most strict single cell capacity, voltage, resistance, discharge curve matching process. Superior Japan and Korea Lithium Polymer raw materials.
  • Local after-sales service (located in Dublin, CA)

Specifications:

  • Minimum Capacity: 5000mAh
  • Configuration: 2S1P / 7.4V / 2Cells
  • Discharge Rate: 50C
  • Max Burst discharge Rate: 100C
  • Net Weight(±20g): 275.5g
  • Dimensions: 139mm x 47.5mm x 25.5mm (L x W x H)
  • Charge Plug: JST-XHR
  • Discharge Plug: Deans

ProTek R/C Flame Resistant Lithium Polymer Charging Bag, and is intended to reduce the chance of damage or injury in the event of a LiPo fire.

The ProTek LiPo Safe Charging Bag is rated up to 30 watt-hours and is made of high tech space-age materials that will help to contain a lithium polymer battery fire. Place your lithium polymer battery inside the LiPo Safe Charging Bag and extend the charging wires through the top flap. Charge your LiPo batteries in the LiPo Safe Charging Bag for peace of mind and a higher level of safety. In the event of a lithium polymer battery mishap, the LiPo Safe Charging Bag’s fire-resistant material reduces the severity of the fire inside and vents the smoke outside the LiPo Safe Bag. The Charging Bag is sealed with a thick, industrial strength Velcro flap and can also be used for safe transportation and storage of your Lithium Polymer batteries.

Due to the volatile nature of Lithium chemistry batteries, charging bags such as the ProTek Lithium Polymer Flame Resistant Storage Bag are required by many tracks, flight clubs and at ROAR sanctioned events. 

WARNING:

  • Never leave charging battery unattended 
  • Always ensure the battery is on a non-flammable surface 
  • Ensure flap is sealed while charging 
  • This ProTek R/C lithium charging bag is intended to reduce the chance of damage in the event of a LiPo fire
  • Not recommended for batteries exceeding 30 watt-hours

 Instructions:
   1. Ensure that charger rate is properly set and polarity is correct
   2. Attach charging leads to battery
   3. Place battery toward the bottom of the LiPo Safe Bag
   4. Place the LiPo Safe Bag on a non-flammable surface
   5. Route charge leads through either vent at the sides of the flap top seam of the LiPo Safe Bag
   6. Close top flap of the LiPo Safe Bag and press hook and loop closure fully closed
   7. Charge battery using proper charging practices

Dimensions: 230x300mm (9x11.8 inches)

Click Here For Warranty Information

Bat-Safe Mini LiPo Charging Case is a clever, compact way to safely store, charge and transport your lipo batteries. Any enthusiast who uses drones, FPV or RC, or lipo batteries in other projects, knows that there is always a risk of fire when using and charging lipo batteries. Safety measures are always wise to prevent and prepare for possible fires, and the Mini LiPo Charging Case is a simple solution to put your mind at ease.
 
This Bat-Safe Mini is a double-walled insulated steel box with a flame arrestor built into the design. Lipo batteries within the specifications will be safer and less of a fire hazard if charged or stored inside the Bat-Safe. In case of a fire the smoke, heat and fumes are filtered by the fire arrestor to minimize the effects and limiting damage done to the surrounding surfaces. The box can safely store up to a two piece 3S 2200mAh equivalent (50Wh). The case is built with a metal clasp to securely close the lid and is marked with the Bat-Safe logo.

Note: Bat-Safe intends for batteries to be charged in this box via placing the wires between the seal of the upper and lower lid.
 
Specifications:
  • Charging space: 6.5x3.9x1.9 inch /165x100x50mm
  • Outer dimensions: 7.6x5x4.5 inch /195x128x115mm
  • Weight: 1.6lbs /0.7kg
Kirkland Signature AA Alkaline Batteries
Included 4 all-purpose alkaline batteries that are dependable and long-lasting. 
Features:
  • 1.5 -V
  • 10-Year Shelf Life
  • No Mercury Added

Customers Also Viewed